Knowledge base · Electrics and cables

Can you plug a media wall fire into an extension lead?

By the Media Wall Setup Guide teamChecked

No. Plug the fire into a wall socket, or have it wired to a fused spur, exactly as its installation manual says.

  • Electrical Safety First's heater advice says to avoid powering a heater from an extension lead, as leads can easily be overloaded.
  • Its extension lead advice says most leads are rated at 13 A, and that overloading can make the lead or the wall plug overheat and cause a fire. It warns against plugging one extension lead into another.
  • British Fires' New Forest manual says not to install the fire using an extension cord.
  • Gazco's eReflex manual says the fire must not be supplied through an external switching device such as a timer.

A 2–3 kW heater is a big load on its own. Plan a dedicated socket or spur for the fire, and separate sockets for the TV, AV kit and LED drivers. Ask a registered electrician; see media wall electrics.

Source: Electrical Safety First, British Fires and Gazco, opened 15 November 2026.

Sources

Opened and checked on 15 November 2026.