Guides · Finishing and lighting
Media wall finishes: plaster, paint, slat panels and what to keep away from the fire
Finishing a media wall, covering tapered-edge jointing or a plaster skim, paint, timber slat panelling and other cladding, and which finishes to keep clear of the fire's heat.

Choose the finish before you buy the board. Tapered-edge plasterboard is made for taping and jointing, square-edge board for a plaster skim. And whatever you clad the wall with, keep combustible finishes outside the zone your fire's manual says to keep clear.
Plaster: tape and joint, or skim
There are two common ways to get a smooth wall:
- Tape and joint (dry lining). Use tapered-edge board. The tapered long edges leave a shallow channel for tape and jointing compound, which you then sand flat. Wickes listed Knauf tapered-edge plasterboard, 12.5 × 1200 × 2400 mm at £12.40 on 15 November 2026. A careful DIYer can get a good result, but it takes patience.
- Skim. A plasterer applies a thin finishing coat over the whole face. Square-edge board is the usual base, such as Knauf square-edge plasterboard, 12.5 × 1200 × 2400 mm, listed at £13.40 the same day. A skim gives the hardest, flattest finish and hides small frame imperfections, but it's a skilled trade.
Siniat's plasterboard range lists standard boards in tapered and square edge, in 9.5, 12.5 and 15 mm. Most media walls use 12.5 mm.
Fire-rated board around the fire
Some installers use fire-rated board around the fire recess. Wickes lists Knauf tapered-edge Fire Panel (£21 on 15 November 2026), which the listing says gives up to half an hour of fire resistance with one layer each side of a partition. That's not a substitute for the fire maker's instructions. Where a manual asks for something specific, such as British Fires' requirement for non-combustible board at least 6 mm thick (like calcium silicate) on any overhang above the New Forest fire in its manual, do exactly that.

Paint
Let new plaster dry fully, then use a mist coat (thinned emulsion) before the finish coats. Dark matt colours are a common choice behind a TV, but dark colours show patchy plaster more. For quantities, Plankley's paint calculator works from your wall area and coats.
Where the fire's manual says plaster must dry before use, follow it. DRU's Virtuo installation manual, for example, says to let a plastered breast dry for at least six weeks before using the heater.
Slat panels and other cladding
Timber or MDF slat panels, often on a felt backing, are a popular media wall feature. They add texture and hide joints. Things to plan:
- Fixing: slat panels are usually screwed or glued to a flat, sound base. Board and finish the wall first, or fix to battens as the panel maker instructs.
- Cut-outs: plan where sockets, brush plates and LED channels go so the slats line up around them.
- Heat: timber, MDF and felt are combustible. Keep them out of the clearance zone around the fire. Econovex's manual, for example, says to keep the fire at least 1 m from combustible materials in front, and to leave 200 mm above it to a mantel or TV. A common approach is a smooth plastered panel around the fire and TV, with slats on the sides.
Other finishes people use include stone-effect or tile cladding, microcement and wallpaper. Each has its own weight, fixing and heat limits, so check the product's instructions, and check heavy cladding against the frame's strength.
Shelves and mantels
- Floating shelves need fixings into solid timber in the frame. Plan noggins at each shelf height before boarding.
- Mantels or shelves above the fire must respect the manual's clearance. Econovex gives 200 mm to a mantel. If your manual doesn't mention a mantel, ask the maker.
The order of work
- Frame, first-fix electrics and conduit, noggins for brackets and shelves.
- Board: tapered edge for jointing, square edge for skim, special boards where the manual requires them.
- Joint or skim, then let it dry.
- Mist coat and paint.
- Slat panels and cladding.
- Second-fix electrics, LED strips, fire, TV.
For the full build, read how to build a media wall. For the extra cost of finishes, see media wall cost.
Common questions
Plaster or MDF?
Screwfix's how to build a media wall guide says you get the best-looking results by finishing with plaster, and that MDF won't look as nice or last as long. MDF is quicker and many flat-pack kits use it. If you use MDF near a fire, check the fire's manual for combustible materials.
How long before I can paint?
Screwfix says plaster can dry in as little as three days in summer, and recommends a mist coat. Cold or damp rooms take longer. New plaster that's still dark in patches isn't ready.
Do I need moisture-resistant board?
Not usually in a living room. Moisture-resistant board, such as the Knauf Moisture Panel that Wickes lists, is meant for humid rooms like bathrooms. For a media wall on a damp-prone external wall, fix the damp first: see media walls on external walls.
What about skirting on the returns?
Screwfix notes you'll need new skirting for the side returns of a media wall. Buy enough to run around the front and the returns, and match the room's existing profile if you want it to look built in.
Can I tile a media wall?
Yes, but plan for it in the frame. The Siniat timber stud partition specification calls for studs at 400 mm centres rather than 600 mm if the wall is to be tiled. Heavy stone-effect or porcelain tiles add a lot of weight, so check the board and adhesive makers' weight limits, and keep tiles and adhesive within any temperature limits near the fire.
Sources
Opened and checked on 15 November 2026.
- wickes.co.uk/Knauf-Tapered-Edge-Plasterboard---12-5-x-1200-x-2400mm/p/220210
- wickes.co.uk/Knauf-Square-Edge-Plasterboard---12-5-x-1200-x-2400mm/p/104123
- wickes.co.uk/Knauf-Tapered-Edge-Fire-Panel---12-5-x-1200-x-2400mm/p/190539
- media.siniat.co.uk/pi266195/original/853151891/siniat_plasterboard_portfolio_leaflet_0601_wm.pdf
- econovexfires.co.uk/wp-content/uploads/2026/10/econovex-owners-manual-3-sided-deep-and-slimline.pdf
- cdn.earthstorm.media/britishfires.com/88/8806f0e75cf18bb9cd0cbc96adeef4fe.pdf
- drufire.com/en-gb/assortiment/dru/virtuo/virtuo-150-3-evolve
- plankley.co.uk/calculators/paint/
- druservice.com/documents/Installation_manual_DRU_EN_Virtuo_150_Evolve.pdf
- screwfix.com/guides/building-doors/home-improvements/how-to-build-a-media-wall
- wickes.co.uk/Knauf-Tapered-Edge-Moisture-Panel---12-5-x-1200-x-2400mm/p/190540
- source.thenbs.com/en/gb/product/siniat-non-loadbearing-timber-stud-partition-ts63x38-12f-25g/aKjj2KY6wMmHVUkDU892W3/mqEkKHtPxAcgNfMQ8WVirk