Knowledge base ยท Fires

How much does an electric fire cost to run?

By the Media Wall Setup Guide teamChecked

At the Ofgem price cap's average electricity rate of 26.32p per kWh, an electric fire's heater costs about 26p an hour per kilowatt on full power. That's about 39p an hour at 1.5 kW, 53p at 2 kW and 79p at 3 kW. The flame effect alone costs a fraction of a penny an hour.

Ofgem's price cap page gives 26.32p per kWh and a 54.83p daily standing charge for electricity from 1 October to 31 December 2026. These are averages for customers paying by Direct Debit in England, Scotland and Wales. Ofgem notes there is no VAT on electricity from 1 October 2026 to 31 March 2027. Your own tariff may differ, so use the rate on your bill.

SettingPowerCost per hour at 26.32p/kWh
Flame effect only (example: 25 W)0.025 kWabout 0.7p
Heater, 1.5 kW1.5 kWabout 39p
Heater, 2 kW2 kWabout 53p
Heater, 3 kW3 kWabout 79p

The 25 W flame-only figure is from a Dimplex product sheet. Check your own fire's figure. A thermostat cuts the heater in and out, so the real cost over an evening is usually lower than running on full the whole time.

The Energy Saving Trust's electric heating advice notes that electricity costs around four times as much as gas per unit, so an electric fire is best used as top-up heat, not as the main heating.

Source: Ofgem, Dimplex and the Energy Saving Trust, opened 15 November 2026. This is general information, not financial advice.

Sources

Opened and checked on 15 November 2026.